The Framework is a 13.5" laptop body with swappable parts, which makes it somewhat future-proof and certainly easily repairable, scoring an "exceedingly rare" 10/10 score from ifixit.com.

There are two generations of the laptop's main board (both compatible with the same body): the Intel 11th and 12th gen chipsets.

I have received my Framework, 12th generation "DIY", device in late September 2022 and will update this page as I go along in the process of ordering, burning-in, setting up and using the device over the years.

Overall, the Framework is a good laptop. I like the keyboard, the touch pad, the expansion cards. Clearly there's been some good work done on industrial design, and it's the most repairable laptop I've had in years. Time will tell, but it looks sturdy enough to survive me many years as well.

This is also one of the most powerful devices I ever lay my hands on. I have managed, remotely, more powerful servers, but this is the fastest computer I have ever owned, and it fits in this tiny case. It is an amazing machine.

On the downside, there's a bit of proprietary firmware required (WiFi, Bluetooth, some graphics) and the Framework ships with a proprietary BIOS, with currently no Coreboot support. Expect to need the latest kernel, firmware, and hacking around a bunch of things to get resolution and keybindings working right.

Like others, I have first found significant power management issues, but many issues can actually be solved with some configuration. Some of the expansion ports (HDMI, DP, MicroSD, and SSD) use power when idle, so don't expect week-long suspend, or "full day" battery while those are plugged in.

Finally, the expansion ports are nice, but there's only four of them. If you plan to have a two-monitor setup, you're likely going to need a dock.

Read on for the detailed review. For context, I'm moving from the Purism Librem 13v4 because it basically exploded on me. I had, in the meantime, reverted back to an old ThinkPad X220, so I sometimes compare the Framework with that venerable laptop as well.

This blog post has been maturing for months now. It started in September 2022 and I declared it completed in March 2023. It's the longest single article on this entire website, currently clocking at about 13,000 words. It will take an average reader a full hour to go through this thing, so I don't expect anyone to actually do that. This introduction should be good enough for most people, read the first section if you intend to actually buy a Framework. Jump around the table of contents as you see fit for after you did buy the laptop, as it might include some crucial hints on how to make it work best for you, especially on (Debian) Linux.

Advice for buyers

Those are things I wish I would have known before buying:

1. consider buying 4 USB-C expansion cards, or at least a mix of 4 USB-A or USB-C cards, as they use less power than other cards and you do want to fill those expansion slots otherwise they snag around and feel insecure

2. you will likely need a dock or at least a USB hub if you want a two-monitor setup, otherwise you'll run out of ports

3. you have to do some serious tuning to get proper (10h+ idle, 10 days suspend) power savings

4. in particular, beware that the HDMI, DisplayPort and particularly the SSD and MicroSD cards take a significant amount power, even when sleeping, up to 2-6W for the latter two

5. beware that the MicroSD card is what it says: Micro, normal SD cards won't fit, and while there might be full sized one eventually, it's currently only at the prototyping stage

6. the Framework monitor has an unusual aspect ratio (3:2): I like it (and it matches classic and digital photography aspect ratio), but it might surprise you

Current status

I have the framework! It's setup with a fresh new Debian bookworm installation. I've ran through a large number of tests and burn in.

I have decided to use the Framework as my daily driver, and had to buy a USB-C dock to get my two monitors connected, which was own adventure.

Update: Framework just (2023-03-23) just announced a whole bunch of new stuff:

• AMD Ryzen 7040 and 13th gen Intel board
• 16" laptop version (pre-order) with an expansion "bay" for an upgradeable graphics module which could also fit M.2 storage
• audio expansion card, since the 16 laptop doesn't have a combo jack
• official mainboard case (back-ordered)
• official battery case (no site yet)
• new bezel colors, including transluscent, green, purple and red (back-ordered)
• new, louder (80dB) speakers
• new 61Wh battery
• matte display
• new hinge

The recording is available in this video and it's not your typical keynote. It starts ~25 minutes late, audio is crap, lightning and camera are crap, clapping seems to be from whatever staff they managed to get together in a room, decor is bizarre, colors are shit. It's amazing.

Specifications

Those are the specifications of the 12th gen, in general terms. Your build will of course vary according to your needs.

• CPU: i5-1240P, i7-1260P, or i7-1280P (Up to 4.4-4.8 GHz, 4+8 cores), Iris Xe graphics
• Storage: 250-4000GB NVMe (or bring your own)
• Memory: 8-64GB DDR4-3200 (or bring your own)
• WiFi 6e (AX210, vPro optional, or bring your own)
• 296.63mm X 228.98mm X 15.85mm, 1.3Kg
• 13.5" display, 3:2 ratio, 2256px X 1504px, 100% sRGB, >400 nit
• 4 x USB-C user-selectable expansion ports, including
  • USB-C
  • USB-A
  • HDMI
  • DP
  • Ethernet
  • MicroSD
  • 250-1000GB SSD
• 3.5mm combo headphone jack
• Kill switches for microphone and camera
• Battery: 55Wh
• Camera: 1080p 60fps
• Biometrics: Fingerprint Reader
• Backlit keyboard
• Power Adapter: 60W USB-C (or bring your own)
• ships with a screwdriver/spludger
• 1 year warranty
• base price: 1000$CAD, but doesn't give you much, typical builds around 1500-2000$CAD

Actual build

This is the actual build I ordered. Amounts in CAD. (1CAD = ~0.75EUR/USD.)

Base configuration

• CPU: Intel® Core™ i5-1240P (AKA Alder Lake P 8 4.4GHz P-threads, 8 3.2GHz E-threads, 16 total, 28-64W), 1079$
• Memory: 16GB (1 x 16GB) DDR4-3200, 104$

Customization

• Keyboard: US English, included

Expansion Cards

• 2 USB-C $24
• 3 USB-A $36
• 2 HDMI $50
• 1 DP $50
• 1 MicroSD $25
• 1 Storage – 1TB $199
• Sub-total: 384$

Accessories

• Power Adapter - US/Canada $64.00

Total

• Before tax: 1606$
• After tax and duties: 1847$
• Free shipping

Quick evaluation

This is basically the TL;DR: here, just focusing on broad pros/cons of the laptop.

Pros

• easily repairable (complete with QR codes pointing to repair guides!), the 11th gen received a 10/10 score from ifixit.com, which they call "exceedingly rare", the 12th gen has a similar hardware design and would probably rate similarly

• replaceable motherboard!!! can be reused as a NUC-like device, with a 3d-printed case, 12th gen board can be bought standalone and retrofitted into an 11th gen case

• not a passing fad: they made a first laptop with the 11th gen Intel chipset in 2021, and a second motherboard with the 12th Intel chipset in 2022

• four modular USB-C ports which can fit HDMI, USB-C (pass-through, can provide power on both sides), USB-A, DisplayPort, MicroSD, external storage (250GB, 1TB), active modding community

• nice power led indicating power level (charging, charged, etc) when plugged

• test account on fwupd.org, "expressed interest to port to coreboot" (according to the Fedora developer) and are testing firmware updates over fwupd, present on LVFS testing, but including for the 12th gen, latest BIOS (3.06) was shipped through LVFS

• excellent documentation of the (proprietary) BIOS

• explicit Linux support with install guides, although you'll have to live with a bit of proprietary firmware, and not everything works correctly

• the EC (Embedded Controller) is open source so of course people are hacking at it, some documentation on what's possible (e.g. changing LED colors, fan curves, etc), see also and possible mainline inclusion for the charge controller

Cons

• the 11th gen is out of stock, except for the higher-end CPUs, which are much less affordable (700$+)

• the 12th gen has compatibility issues with Debian, followup in the DebianOn page, but basically: brightness hotkeys (fixed!), power management, wifi, the webcam is okay even though the chipset is the infamous alder lake because it does not have the fancy camera; most issues currently seem solvable, and upstream is working with mainline to get their shit working

• 12th gen might have issues with thunderbolt docks

• they used to have some difficulty keeping up with the orders: first two batches shipped, third batch sold out, fourth batch should have shipped in October 2021. they generally seem to keep up with shipping. update (august 2022): they rolled out a second line of laptops (12th gen), first batch shipped, second batch shipped late, September 2022 batch was generally on time, see this spreadsheet for a crowdsourced effort to track those supply chain issues seem to be under control as of early 2023. I got the Ethernet expansion card shipped within a week.

• compared to my previous laptop (Purism Librem 13v4), it feels strangely bulkier and heavier; it's actually lighter than the purism (1.3kg vs 1.4kg) and thinner (15.85mm vs 18mm) but the design of the Purism laptop (tapered edges) makes it feel thinner

• no space for a 2.5" drive

• rather bright LED around power button, but can be dimmed in the BIOS (not low enough to my taste) I got used to it

• fan quiet when idle, but can be noisy when running, for example if you max a CPU for a while

• battery described as "mediocre" by Ars Technica (above), confirmed poor in my tests (see below)

• no RJ-45 port, and attempts at designing ones are failing because the modular plugs are too thin to fit (according to Linux After Dark), so unlikely to have one in the future Update: they cracked that nut and ship an 2.5 gbps Ethernet expansion card with a realtek chipset, without any firmware blob

• a bit pricey for the performance, especially when compared to the competition (e.g. Dell XPS, Apple M1)

• 12th gen Intel has glitchy graphics, seems like Intel hasn't fully landed proper Linux support for that chipset yet

Initial hardware setup

A breeze.

Accessing the board

The internals are accessed through five TorX screws, but there's a nice screwdriver/spudger that works well enough. The screws actually hold in place so you can't even lose them.

The first setup is a bit counter-intuitive coming from the Librem laptop, as I expected the back cover to lift and give me access to the internals. But instead the screws is release the keyboard and touch pad assembly, so you actually need to flip the laptop back upright and lift the assembly off to get access to the internals. Kind of scary.

I also actually unplugged a connector in lifting the assembly because I lifted it towards the monitor, while you actually need to lift it to the right. Thankfully, the connector didn't break, it just snapped off and I could plug it back in, no harm done.

Once there, everything is well indicated, with QR codes all over the place supposedly leading to online instructions.

Bad QR codes

Unfortunately, the QR codes I tested (in the expansion card slot, the memory slot and CPU slots) did not actually work so I wonder how useful those actually are.

After all, they need to point to something and that means a URL, a running website that will answer those requests forever. I bet those will break sooner than later and in fact, as far as I can tell, they just don't work at all. I prefer the approach taken by the MNT reform here which designed (with the 100 rabbits folks) an actual paper handbook (PDF).

The first QR code that's immediately visible from the back of the laptop, in an expansion cord slot, is a 404. It seems to be some serial number URL, but I can't actually tell because, well, the page is a 404.

I was expecting that bar code to lead me to an introduction page, something like "how to setup your Framework laptop". Support actually confirmed that it should point a quickstart guide. But in a bizarre twist, they somehow sent me the URL with the plus (+) signs escaped, like this:

https://guides.frame.work/Guide/Framework\+Laptop\+DIY\+Edition\+Quick\+Start\+Guide/57

... which Firefox immediately transforms in:

https://guides.frame.work/Guide/Framework/+Laptop/+DIY/+Edition/+Quick/+Start/+Guide/57

I'm puzzled as to why they would send the URL that way, the proper URL is of course:

https://guides.frame.work/Guide/Framework+Laptop+DIY+Edition+Quick+Start+Guide/57

(They have also "let the team know about this for feedback and help resolve the problem with the link" which is a support code word for "ha-ha! nope! not my problem right now!" Trust me, I know, my own code word is "can you please make a ticket?")

Seating disks and memory

The "DIY" kit doesn't actually have that much of a setup. If you bought RAM, it's shipped outside the laptop in a little plastic case, so you just seat it in as usual.

Then you insert your NVMe drive, and, if that's your fancy, you also install your own mPCI WiFi card. If you ordered one (which was my case), it's pre-installed.

Closing the laptop is also kind of amazing, because the keyboard assembly snaps into place with magnets. I have actually used the laptop with the keyboard unscrewed as I was putting the drives in and out, and it actually works fine (and will probably void your warranty, so don't do that). (But you can.) (But don't, really.)

Hardware review

Keyboard and touch pad

The keyboard feels nice, for a laptop. I'm used to mechanical keyboard and I'm rather violent with those poor things. Yet the key travel is nice and it's clickety enough that I don't feel too disoriented.

At first, I felt the keyboard as being more laggy than my normal workstation setup, but it turned out this was a graphics driver issues. After enabling a composition manager, everything feels snappy.

The touch pad feels good. The double-finger scroll works well enough, and I don't have to wonder too much where the middle button is, it just works.

Taps don't work, out of the box: that needs to be enabled in Xorg, with something like this:

cat > /etc/X11/xorg.conf.d/40-libinput.conf <<EOF
Section "InputClass"
      Identifier "libinput touch pad catchall"
      MatchIsTouchpad "on"
      MatchDevicePath "/dev/input/event*"
      Driver "libinput"
      Option "Tapping" "on"
      Option "TappingButtonMap" "lmr"
EndSection
EOF

But be aware that once you enable that tapping, you'll need to deal with palm detection... So I have not actually enabled this in the end.

Power button

The power button is a little dangerous. It's quite easy to hit, as it's right next to one expansion card where you are likely to plug in a cable power. And because the expansion cards are kind of hard to remove, you might squeeze the laptop (and the power key) when trying to remove the expansion card next to the power button.

So obviously, don't do that. But that's not very helpful.

An alternative is to make the power button do something else. With systemd-managed systems, it's actually quite easy. Add a HandlePowerKey stanza to (say) /etc/systemd/logind.conf.d/power-suspends.conf:

[Login]
HandlePowerKey=suspend
HandlePowerKeyLongPress=poweroff

You might have to create the directory first:

mkdir /etc/systemd/logind.conf.d/

Then restart logind:

systemctl restart systemd-logind

And the power button will suspend! Long-press to power off doesn't actually work as the laptop immediately suspends...

Note that there's probably half a dozen other ways of doing this, see this, this, or that.

Special keybindings

There is a series of "hidden" (as in: not labeled on the key) keybindings related to the fn keybinding that I actually find quite useful.

It looks like those are defined in the microcontroller so it would be possible to add some. For example, the SysRq key is almost bound to fn s in there.

Note that most other shortcuts like this are clearly documented (volume, brightness, etc). One key that's less obvious is F12 that only has the Framework logo on it. That actually calls the keysym XF86AudioMedia which, interestingly, does absolutely nothing here. By default, on Windows, it opens your browser to the Framework website and, on Linux, your "default media player".

The keyboard backlight can be cycled with fn-space. The dimmer version is dim enough, and the keybinding is easy to find in the dark.

A skinny elephant would be performed with alt PrtScr (above F11) KEY, so for example alt fn F11 b should do a hard reset. This comment suggests you need to hold the fn only if "function lock" is on, but that's actually the opposite of my experience.

Out of the box, some of the fn keys don't work. Mute, volume up/down, brightness, monitor changes, and the airplane mode key all do basically nothing. They don't send proper keysyms to Xorg at all.

This is a known problem and it's related to the fact that the laptop has light sensors to adjust the brightness automatically. Somehow some of those keys (e.g. the brightness controls) are supposed to show up as a different input device, but don't seem to work correctly. It seems like the solution is for the Framework team to write a driver specifically for this, but so far no progress since July 2022.

In the meantime, the fancy functionality can be supposedly disabled with:

echo 'blacklist hid_sensor_hub' | sudo tee /etc/modprobe.d/framework-als-blacklist.conf

... and a reboot. This solution is also documented in the upstream guide.

Note that there's another solution flying around that fixes this by changing permissions on the input device but I haven't tested that or seen confirmation it works.

Update: it seems like this issue has been fixed in newer kernels (6.6.6+?), but I couldn't figure out if the light sensor still works. Worse, I thought it was fixed, but then it wasn't: I think I forgot to run depmod -a, because at some point my fn lock key broke...

Kill switches

The Framework has two "kill switches": one for the camera and the other for the microphone. The camera one actually disconnects the USB device when turned off, and the mic one seems to cut the circuit. It doesn't show up as muted, it just stops feeding the sound.

Both kill switches are around the main camera, on top of the monitor, and quite discreet. Then turn "red" when enabled (i.e. "red" means "turned off").

Monitor

The monitor looks pretty good to my untrained eyes. I have yet to do photography work on it, but some photos I looked at look sharp and the colors are bright and lively. The blacks are dark and the screen is bright.

I have yet to use it in full sunlight.

The dimmed light is very dim, which I like.

Screen backlight

I bind brightness keys to xbacklight in i3, but out of the box I get this error:

sep 29 22:09:14 angela i3[5661]: No outputs have backlight property

It just requires this blob in /etc/X11/xorg.conf.d/backlight.conf:

Section "Device"
    Identifier  "Card0"
    Driver      "intel"
    Option      "Backlight"  "intel_backlight"
EndSection

This way I can control the actual backlight power with the brightness keys, and they do significantly reduce power usage.

Multiple monitor support

I have been able to hook up my two old monitors to the HDMI and DisplayPort expansion cards on the laptop. The lid closes without suspending the machine, and everything works great.

I actually run out of ports, even with a 4-port USB-A hub, which gives me a total of 7 ports:

1. power (USB-C)
2. monitor 1 (DisplayPort)
3. monitor 2 (HDMI)
4. USB-A hub, which adds:
5. keyboard (USB-A)
6. mouse (USB-A)
7. Yubikey
8. external sound card

Now the latter, I might be able to get rid of if I switch to a combo-jack headset, which I do have (and still need to test).

But still, this is a problem. I'll probably need a powered USB-C dock and better monitors, possibly with some Thunderbolt chaining, to save yet more ports.

But that means more money into this setup, argh. And figuring out my monitor situation is the kind of thing I'm not that big of a fan of. And neither is shopping for USB-C (or is it Thunderbolt?) hubs.

My normal autorandr setup doesn't work: I have tried saving a profile and it doesn't get autodetected, so I also first need to do:

autorandr -l framework-external-dual-lg-acer

The magic:

autorandr -l horizontal

... also works well.

The worst problem with those monitors right now is that they have a radically smaller resolution than the main screen on the laptop, which means I need to reset the font scaling to normal every time I switch back and forth between those monitors and the laptop, which means I actually need to do this:

autorandr -l horizontal &&
eho Xft.dpi: 96 | xrdb -merge &&
systemctl restart terminal xcolortaillog background-image emacs &&
i3-msg restart

Kind of disruptive.

Expansion ports

I ordered a total of 10 expansion ports.

I did manage to initialize the 1TB drive as an encrypted storage, mostly to keep photos as this is something that takes a massive amount of space (500GB and counting) and that I (unfortunately) don't work on very often (but still carry around).

The expansion ports are fancy and nice, but not actually that convenient. They're a bit hard to take out: you really need to crimp your fingernails on there and pull hard to take them out. There's a little button next to them to release, I think, but at first it feels a little scary to pull those pucks out of there. You get used to it though, and it's one of those things you can do without looking eventually.

There's only four expansion ports. Once you have two monitors, the drive, and power plugged in, bam, you're out of ports; there's nowhere to plug my Yubikey. So if this is going to be my daily driver, with a dual monitor setup, I will need a dock, which means more crap firmware and uncertainty, which isn't great. There are actually plans to make a dual-USB card, but that is blocked on designing an actual board for this.

I can't wait to see more expansion ports produced. There's a ethernet expansion card which quickly went out of stock basically the day it was announced, but was eventually restocked.

I would like to see a proper SD-card reader. There's a MicroSD card reader, but that obviously doesn't work for normal SD cards, which would be more broadly compatible anyways (because you can have a MicroSD to SD card adapter, but I have never heard of the reverse). Someone actually found a SD card reader that fits and then someone else managed to cram it in a 3D printed case, which is kind of amazing.

Still, I really like that idea that I can carry all those little adapters in a pouch when I travel and can basically do anything I want. It does mean I need to shuffle through them to find the right one which is a little annoying. I have an elastic band to keep them lined up so that all the ports show the same side, to make it easier to find the right one. But that quickly gets undone and instead I have a pouch full of expansion cards.

Another awesome thing with the expansion cards is that they don't just work on the laptop: anything that takes USB-C can take those cards, which means you can use it to connect an SD card to your phone, for backups, for example. Heck, you could even connect an external display to your phone that way, assuming that's supported by your phone of course (and it probably isn't).

The expansion ports do take up some power, even when idle. See the power management section below, and particularly the power usage tests for details.

USB-C charging

One thing that is really a game changer for me is USB-C charging. It's hard to overstate how convenient this is. I often have a USB-C cable lying around to charge my phone, and I can just grab that thing and pop it in my laptop. And while it will obviously not charge as fast as the provided charger, it will stop draining the battery at least.

(As I wrote this, I had the laptop plugged in the Samsung charger that came with a phone, and it was telling me it would take 6 hours to charge the remaining 15%. With the provided charger, that flew down to 15 minutes. Similarly, I can power the laptop from the power grommet on my desk, reducing clutter as I have that single wire out there instead of the bulky power adapter.)

I also really like the idea that I can charge my laptop with a power bank or, heck, with my phone, if push comes to shove. (And vice-versa!)

This is awesome. And it works from any of the expansion ports, of course. There's a little led next to the expansion ports as well, which indicate the charge status:

• red/amber: charging
• white: charged
• off: unplugged

I couldn't find documentation about this, but the forum answered.

This is something of a recurring theme with the Framework. While it has a good knowledge base and repair/setup guides (and the forum is awesome) but it doesn't have a good "owner manual" that shows you the different parts of the laptop and what they do. Again, something the MNT reform did well.

Another thing that people are asking about is an external sleep indicator: because the power LED is on the main keyboard assembly, you don't actually see whether the device is active or not when the lid is closed.

Finally, I wondered what happens when you plug in multiple power sources and it turns out the charge controller is actually pretty smart: it will pick the best power source and use it. The only downside is it can't use multiple power sources, but that seems like a bit much to ask.

Multimedia and other devices

Those things also work:

• webcam: splendid, best webcam I've ever had (but my standards are really low)
• onboard mic: works well, good gain (maybe a bit much)
• onboard speakers: sound okay, a little metal-ish, loud enough to be annoying, see this thread for benchmarks, apparently pretty good speakers
• combo jack: works, with slight hiss, see below

There's also a light sensor, but it conflicts with the keyboard brightness controls (see above).

There's also an accelerometer, but it's off by default and will be removed from future builds.

Combo jack mic tests

The Framework laptop ships with a combo jack on the left side, which allows you to plug in a CTIA (source) headset. In human terms, it's a device that has both a stereo output and a mono input, typically a headset or ear buds with a microphone somewhere.

It works, which is better than the Purism (which only had audio out), but is on par for the course for that kind of onboard hardware. Because of electrical interference, such sound cards very often get lots of noise from the board.

With a Jabra Evolve 40, the built-in USB sound card generates basically zero noise on silence (invisible down to -60dB in Audacity) while plugging it in directly generates a solid -30dB hiss. There is a noise-reduction system in that sound card, but the difference is still quite striking.

On a comparable setup (curie, a 2017 Intel NUC), there is also a his with the Jabra headset, but it's quieter, more in the order of -40/-50 dB, a noticeable difference. Interestingly, testing with my Mee Audio Pro M6 earbuds leads to a little more hiss on curie, more on the -35/-40 dB range, close to the Framework.

Also note that another sound card, the Antlion USB adapter that comes with the ModMic 4, also gives me pretty close to silence on a quiet recording, picking up less than -50dB of background noise. It's actually probably picking up the fans in the office, which do make audible noises.

In other words, the hiss of the sound card built in the Framework laptop is so loud that it makes more noise than the quiet fans in the office. Or, another way to put it is that two USB sound cards (the Jabra and the Antlion) are able to pick up ambient noise in my office but not the Framework laptop.

See also my audio page.

Performance tests

Compiling Linux 5.19.11

On a single core, compiling the Debian version of the Linux kernel takes around 100 minutes:

5411.85user 673.33system 1:37:46elapsed 103%CPU (0avgtext+0avgdata 831700maxresident)k
10594704inputs+87448000outputs (9131major+410636783minor)pagefaults 0swaps

This was using 16 watts of power, with full screen brightness.

With all 16 cores (make -j16), it takes less than 25 minutes:

19251.06user 2467.47system 24:13.07elapsed 1494%CPU (0avgtext+0avgdata 831676maxresident)k
8321856inputs+87427848outputs (30792major+409145263minor)pagefaults 0swaps

I had to plug the normal power supply after a few minutes because battery would actually run out using my desk's power grommet (34 watts).

During compilation, fans were spinning really hard, quite noisy, but not painfully so.

The laptop was sucking 55 watts of power, steadily:

  Time    User  Nice   Sys  Idle    IO  Run Ctxt/s  IRQ/s Fork Exec Exit  Watts
-------- ----- ----- ----- ----- ----- ---- ------ ------ ---- ---- ---- ------
 Average  87.9   0.0  10.7   1.4   0.1 17.8 6583.6 5054.3 233.0 223.9 233.1  55.96
 GeoMean  87.9   0.0  10.6   1.2   0.0 17.6 6427.8 5048.1 227.6 218.7 227.7  55.96
  StdDev   1.4   0.0   1.2   0.6   0.2  3.0 1436.8  255.5 50.0 47.5 49.7   0.20
-------- ----- ----- ----- ----- ----- ---- ------ ------ ---- ---- ---- ------
 Minimum  85.0   0.0   7.8   0.5   0.0 13.0 3594.0 4638.0 117.0 111.0 120.0  55.52
 Maximum  90.8   0.0  12.9   3.5   0.8 38.0 10174.0 5901.0 374.0 362.0 375.0  56.41
-------- ----- ----- ----- ----- ----- ---- ------ ------ ---- ---- ---- ------
Summary:
CPU:  55.96 Watts on average with standard deviation 0.20
Note: power read from RAPL domains: package-0, uncore, package-0, core, psys.
These readings do not cover all the hardware in this device.

memtest86+

I ran Memtest86+ v6.00b3. It shows something like this:

Memtest86+ v6.00b3      | 12th Gen Intel(R) Core(TM) i5-1240P
CLK/Temp: 2112MHz    78/78°C | Pass  2% #
L1 Cache:   48KB    414 GB/s | Test 46% ##################
L2 Cache: 1.25MB    118 GB/s | Test #3 [Moving inversions, 1s & 0s] 
L3 Cache:   12MB     43 GB/s | Testing: 16GB - 18GB [1GB of 15.7GB]
Memory  :  15.7GB  14.9 GB/s | Pattern: 
--------------------------------------------------------------------------------
CPU: 4P+8E-Cores (16T)    SMP: 8T (PAR))  | Time:  0:27:23  Status: Pass     \
RAM: 1600MHz (DDR4-3200) CAS 22-22-22-51  | Pass:  1        Errors: 0
--------------------------------------------------------------------------------

Memory SPD Information
----------------------
 - Slot 2: 16GB DDR-4-3200 - Crucial CT16G4SFRA32A.C16FP (2022-W23)







                          Framework FRANMACP04
 <ESC> Exit  <F1> Configuration  <Space> Scroll Lock            6.00.unknown.x64

So about 30 minutes for a full 16GB memory test.

Software setup

Once I had everything in the hardware setup, I figured, voilà, I'm done, I'm just going to boot this beautiful machine and I can get back to work.

I don't understand why I am so naïve some times. It's mind boggling.

Obviously, it didn't happen that way at all, and I spent the best of the three following days tinkering with the laptop.

Secure boot and EFI

First, I couldn't boot off of the NVMe drive I transferred from the previous laptop (the Purism) and the BIOS was not very helpful: it was just complaining about not finding any boot device, without dropping me in the real BIOS.

At first, I thought it was a problem with my NVMe drive, because it's not listed in the compatible SSD drives from upstream. But I figured out how to enter BIOS (press F2 manically, of course), which showed the NVMe drive was actually detected. It just didn't boot, because it was an old (2010!!) Debian install without EFI.

So from there, I disabled secure boot, and booted a grml image to try to recover. And by "boot" I mean, I managed to get to the grml boot loader which promptly failed to load its own root file system somehow. I still have to investigate exactly what happened there, but it failed some time after the initrd load with:

Unable to find medium containing a live file system

This, it turns out, was fixed in Debian lately, so a daily GRML build will not have this problems. The upcoming 2022 release (likely 2022.10 or 2022.11) will also get the fix.

I did manage to boot the development version of the Debian installer which was a surprisingly good experience: it mounted the encrypted drives and did everything pretty smoothly. It even offered me to reinstall the boot loader, but that ultimately (and correctly, as it turns out) failed because I didn't have a /boot/efi partition.

At this point, I realized there was no easy way out of this, and I just proceeded to completely reinstall Debian. I had a spare NVMe drive lying around (backups FTW!) so I just swapped that in, rebooted in the Debian installer, and did a clean install. I wanted to switch to bookworm anyways, so I guess that's done too.

Storage limitations

Another thing that happened during setup is that I tried to copy over the internal 2.5" SSD drive from the Purism to the Framework 1TB expansion card. There's no 2.5" slot in the new laptop, so that's pretty much the only option for storage expansion.

I was tired and did something wrong. I ended up wiping the partition table on the original 2.5" drive.

Oops.

It might be recoverable, but just restoring the partition table didn't work either, so I'm not sure how I recover the data there. Normally, everything on my laptops and workstations is designed to be disposable, so that wasn't that big of a problem. I did manage to recover most of the data thanks to git-annex reinit, but that was a little hairy.

Bootstrapping Puppet

Once I had some networking, I had to install all the packages I needed. The time I spent setting up my workstations with Puppet has finally paid off. What I actually did was to restore two critical directories:

/etc/ssh
/var/lib/puppet

So that I would keep the previous machine's identity. That way I could contact the Puppet server and install whatever was missing. I used my Puppet optimization trick to do a batch install and then I had a good base setup, although not exactly as it was before. 1700 packages were installed manually on angela before the reinstall, and not in Puppet.

I did not inspect each one individually, but I did go through /etc and copied over more SSH keys, for backups and SMTP over SSH.

LVFS support

It looks like there's support for the (de-facto) standard LVFS firmware update system. At least I was able to update the UEFI firmware with a simple:

apt install fwupd-amd64-signed
fwupdmgr refresh
fwupdmgr get-updates
fwupdmgr update

Nice. The 12th gen BIOS updates, currently (January 2023) beta, can be deployed through LVFS with:

fwupdmgr enable-remote lvfs-testing
echo 'DisableCapsuleUpdateOnDisk=true' >> /etc/fwupd/uefi_capsule.conf 
fwupdmgr update

Those instructions come from the beta forum post. I performed the BIOS update on 2023-01-16T16:00-0500.

Update: more than a year later, that update never came out of beta. Worse, they published a new update (3.08) including security fixes, but only for Windows. See this very long thread on the forum, my comment, and this Ars article.

I have filed a formal complaint with support, threatening a refund, as I find it simply unacceptable that they just drop support for Linux like this.

Resolution tweaks

The Framework laptop resolution (2256px X 1504px) is big enough to give you a pretty small font size, so welcome to the marvelous world of "scaling".

The Debian wiki page has a few tricks for this.

Console

This will make the console and grub fonts more readable:

cat >> /etc/default/console-setup <<EOF
FONTFACE="Terminus"
FONTSIZE=32x16
EOF
echo GRUB_GFXMODE=1024x768 >> /etc/default/grub
update-grub

Xorg

Adding this to your .Xresources will make everything look much bigger:

! 1.5*96
Xft.dpi: 144

Apparently, some of this can also help:

! These might also be useful depending on your monitor and personal preference:
Xft.autohint: 0
Xft.lcdfilter:  lcddefault
Xft.hintstyle:  hintfull
Xft.hinting: 1
Xft.antialias: 1
Xft.rgba: rgb

It my experience it also makes things look a little fuzzier, which is frustrating because you have this awesome monitor but everything looks out of focus. Just bumping Xft.dpi by a 1.5 factor looks good to me.

The Debian Wiki has a page on HiDPI, but it's not as good as the Arch Wiki, where the above blurb comes from. I am not using the latter because I suspect it's causing some of the "fuzziness".

TODO: find the equivalent of this GNOME hack in i3? (gsettings set org.gnome.mutter experimental-features "['scale-monitor-framebuffer']"), taken from this Framework guide

Issues

BIOS configuration

The Framework BIOS has some minor issues. One issue I personally encountered is that I had disabled Quick boot and Quiet boot in the BIOS to diagnose the above boot issues. This, in turn, triggers a bug where the BIOS boot manager (F12) would just hang completely. It would also fail to boot from an external USB drive.

The current fix (as of BIOS 3.03) is to re-enable both Quick boot and Quiet boot. Presumably this is something that will get fixed in a future BIOS update.

Note that the following keybindings are active in the BIOS POST check:

WiFi compatibility issues

I couldn't make WiFi work at first. Obviously, the default Debian installer doesn't ship with proprietary firmware (although that might change soon) so the WiFi card didn't work out of the box. But even after copying the firmware through a USB stick, I couldn't quite manage to find the right combination of ip/iw/wpa-supplicant (yes, after repeatedly copying a bunch more packages over to get those bootstrapped). (Next time I should probably try something like this post.)

Thankfully, I had a little USB-C dongle with a RJ-45 jack lying around. That also required a firmware blob, but it was a single package to copy over, and with that loaded, I had network.

Eventually, I did managed to make WiFi work; the problem was more on the side of "I forgot how to configure a WPA network by hand from the commandline" than anything else. NetworkManager worked fine and got WiFi working correctly.

Note that this is with Debian bookworm, which has the 5.19 Linux kernel, and with the firmware-nonfree (firmware-iwlwifi, specifically) package.

Battery life

I was having between about 7 hours of battery on the Purism Librem 13v4, and that's after a year or two of battery life. Now, I still have about 7 hours of battery life, which is nicer than my old ThinkPad X220 (20 minutes!) but really, it's not that good for a new generation laptop. The 12th generation Intel chipset probably improved things compared to the previous one Framework laptop, but I don't have a 11th gen Framework to compare with).

(Note that those are estimates from my status bar, not wall clock measurements. They should still be comparable between the Purism and Framework, that said.)

The battery life doesn't seem up to, say, Dell XPS 13, ThinkPad X1, and of course not the Apple M1, where I would expect 10+ hours of battery life out of the box.

That said, I do get those kind estimates when the machine is fully charged and idle. In fact, when everything is quiet and nothing is plugged in, I get dozens of hours of battery life estimated (I've seen 25h!). So power usage fluctuates quite a bit depending on usage, which I guess is expected.

Concretely, so far, light web browsing, reading emails and writing notes in Emacs (e.g. this file) takes about 8W of power:

Time    User  Nice   Sys  Idle    IO  Run Ctxt/s  IRQ/s Fork Exec Exit  Watts
-------- ----- ----- ----- ----- ----- ---- ------ ------ ---- ---- ---- ------
 Average   1.7   0.0   0.5  97.6   0.2  1.2 4684.9 1985.2 126.6 39.1 128.0   7.57
 GeoMean   1.4   0.0   0.4  97.6   0.1  1.2 4416.6 1734.5 111.6 27.9 113.3   7.54
  StdDev   1.0   0.2   0.2   1.2   0.0  0.5 1584.7 1058.3 82.1 44.0 80.2   0.71
-------- ----- ----- ----- ----- ----- ---- ------ ------ ---- ---- ---- ------
 Minimum   0.2   0.0   0.2  94.9   0.1  1.0 2242.0  698.2 82.0 17.0 82.0   6.36
 Maximum   4.1   1.1   1.0  99.4   0.2  3.0 8687.4 4445.1 463.0 249.0 449.0   9.10
-------- ----- ----- ----- ----- ----- ---- ------ ------ ---- ---- ---- ------
Summary:
System:   7.57 Watts on average with standard deviation 0.71

Expansion cards matter a lot in the battery life (see below for a thorough discussion), my normal setup is 2xUSB-C and 1xUSB-A (yes, with an empty slot, and yes, to save power).

Interestingly, playing a video in a (720p) window in a window takes up more power (10.5W) than in full screen (9.5W) but I blame that on my desktop setup (i3 + compton)... Not sure if mpv hits the VA-API, maybe not in windowed mode. Similar results with 1080p, interestingly, except the window struggles to keep up altogether. Full screen playback takes a relatively comfortable 9.5W, which means a solid 5h+ of playback, which is fine by me.

Fooling around the web, small edits, youtube-dl, and I'm at around 80% battery after about an hour, with an estimated 5h left, which is a little disappointing. I had a 7h remaining estimate before I started goofing around Discourse, so I suspect the website is a pretty big battery drain, actually. I see about 10-12 W, while I was probably at half that (6-8W) just playing music with mpv in the background...

In other words, it looks like editing posts in Discourse with Firefox takes a solid 4-6W of power. Amazing and gross.

(When writing about abusive power usage generates more power usage, is that an heisenbug? Or schrödinbug?)

Power management

Compared to the Purism Librem 13v4, the ongoing power usage seems to be slightly better. An anecdotal metric is that the Purism would take 800mA idle, while the more powerful Framework manages a little over 500mA as I'm typing this, fluctuating between 450 and 600mA. That is without any active expansion card, except the storage. Those numbers come from the output of tlp-stat -b and, unfortunately, the "ampere" unit makes it quite hard to compare those, because voltage is not necessarily the same between the two platforms.

• TODO: review Arch Linux's tips on power saving
• TODO: i915 driver has a lot of parameters, including some about power saving, see, again, the arch wiki, and particularly enable_fbc=1

TL:DR; power management on the laptop is an issue, but there's various tweaks you can make to improve it. Try:

• powertop --auto-tune
• apt install tlp && systemctl enable tlp
• nvme.noacpi=1 mem_sleep_default=deep on the kernel command line may help with standby power usage
• keep only USB-C expansion cards plugged in, all others suck power even when idle
• consider upgrading the BIOS to latest beta (3.06 at the time of writing), unverified power savings
• latest Linux kernels (6.2) promise power savings as well (unverified)

Update: also try to follow the official optimization guide. It was made for Ubuntu but will probably also work for your distribution of choice with a few tweaks. They recommend using tlpui but it's not packaged in Debian. There is, however, a Flatpak release. In my case, it resulted in the following diff to tlp.conf: tlp.patch.

Background on CPU architecture

There were power problems in the 11th gen Framework laptop, according to this report from Linux After Dark, so the issues with power management on the Framework are not new.

The 12th generation Intel CPU (AKA "Alder Lake") is a big-little architecture with "power-saving" and "performance" cores. There used to be performance problems introduced by the scheduler in Linux 5.16 but those were eventually fixed in 5.18, which uses Intel's hardware as an "intelligent, low-latency hardware-assisted scheduler". According to Phoronix, the 5.19 release improved the power saving, at the cost of some penalty cost. There were also patch series to make the scheduler configurable, but it doesn't look those have been merged as of 5.19. There was also a session about this at the 2022 Linux Plumbers, but they stopped short of talking more about the specific problems Linux is facing in Alder lake:

Specifically, the kernel's energy-aware scheduling heuristics don't work well on those CPUs. A number of features present there complicate the energy picture; these include SMT, Intel's "turbo boost" mode, and the CPU's internal power-management mechanisms. For many workloads, running on an ostensibly more power-hungry Pcore can be more efficient than using an Ecore. Time for discussion of the problem was lacking, though, and the session came to a close.

All this to say that the 12gen Intel line shipped with this Framework series should have better power management thanks to its power-saving cores. And Linux has had the scheduler changes to make use of this (but maybe is still having trouble). In any case, this might not be the source of power management problems on my laptop, quite the opposite.

Also note that the firmware updates for various chipsets are supposed to improve things eventually.

On the other hand, The Verge simply declared the whole P-series a mistake...

Attempts at improving power usage

I did try to follow some of the tips in this forum post. The tricks powertop --auto-tune and tlp's PCIE_ASPM_ON_BAT=powersupersave basically did nothing: I was stuck at 10W power usage in powertop (600+mA in tlp-stat).

Apparently, I should be able to reach the C8 CPU power state (or even C9, C10) in powertop, but I seem to be stock at C7. (Although I'm not sure how to read that tab in powertop: in the Core(HW) column there's only C3/C6/C7 states, and most cores are 85% in C7 or maybe C6. But the next column over does show many CPUs in C10 states...

As it turns out, the graphics card actually takes up a good chunk of power unless proper power management is enabled (see below). After tweaking this, I did manage to get down to around 7W power usage in powertop.

Expansion cards actually do take up power, and so does the screen, obviously. The fully-lit screen takes a solid 2-3W of power compared to the fully dimmed screen. When removing all expansion cards and making the laptop idle, I can spin it down to 4 watts power usage at the moment, and an amazing 2 watts when the screen turned off.

Caveats

Abusive (10W+) power usage that I initially found could be a problem with my desktop configuration: I have this silly status bar that updates every second and probably causes redraws... The CPU certainly doesn't seem to spin down below 1GHz. Also note that this is with an actual desktop running with everything: it could very well be that some things (I'm looking at you Signal Desktop) take up unreasonable amount of power on their own (hello, 1W/electron, sheesh). Syncthing and containerd (Docker!) also seem to take a good 500mW just sitting there.

Beyond my desktop configuration, this could, of course, be a Debian-specific problem; your favorite distribution might be better at power management.

Idle power usage tests

Some expansion cards waste energy, even when unused. Here is a summary of the findings from the powerstat page. I also include other devices tested in this page for completeness:

So it looks like all expansion cards but the USB-C ones are active, i.e. they draw power with idle. The USB-A cards are the least concern, sucking out 10mW, pretty much within the margin of error. But both the DisplayPort and HDMI do take a few hundred miliwatts. It looks like USB-A connectors have this fundamental flaw that they necessarily draw some powers because they lack the power negotiation features of USB-C. At least according to this post:

It seems the USB A must have power going to it all the time, that the old USB 2 and 3 protocols, the USB C only provides power when there is a connection. Old versus new.

Apparently, this is a problem specific to the USB-C to USB-A adapter that ships with the Framework. Some people have actually changed their orders to all USB-C because of this problem, but I'm not sure the problem is as serious as claimed in the forums. I couldn't reproduce the "one watt" power drains suggested elsewhere, at least not repeatedly. (A previous version of this post did show such a power drain, but it was in a less controlled test environment than the series of more rigorous tests above.)

The worst offenders are the storage cards: the SSD drive takes at least one watt of power and the MicroSD card seems to want to take all the way up to 6 watts of power, both just sitting there doing nothing. This confirms claims of 1.4W for the SSD (but not 5W) power usage found elsewhere. The former post has instructions on how to disable the card in software. The MicroSD card has been reported as using 2 watts, but I've seen it as high as 6 watts, which is pretty damning.

The Framework team has a beta update for the DisplayPort adapter but currently only for Windows (LVFS technically possible, "under investigation"). A USB-A firmware update is also under investigation. It is therefore likely at least some of those power management issues will eventually be fixed.

Note that the upcoming Ethernet card has a reported 2-8W power usage, depending on traffic. I did my own power usage tests in powerstat-wayland and they seem lower than 2W.

The upcoming 6.2 Linux kernel might also improve battery usage when idle, see this Phoronix article for details, likely in early 2023.

Idle power usage tests under Wayland

Update: I redid those tests under Wayland, see powerstat-wayland for details. The TL;DR: is that power consumption is either smaller or similar.

Idle power usage tests, 3.06 beta BIOS

I redid the idle tests after the 3.06 beta BIOS update and ended up with this results:

Note that the table summary is different than the previous table: here we show the absolute numbers while the previous table was doing a confusing attempt at showing relative (to the baseline) numbers.

Conclusion: the 3.06 BIOS update did not significantly change idle power usage stats except for the MicroSD card which has significantly improved.

The new "external USB" test is also interesting: it shows how the provided 1TB SSD card performs (admirably) compared to existing devices. The other new result is the MicroSD card with a card which, interestingly, uses less power than the 1TB SSD drive.

Standby battery usage

I wrote some quick hack to evaluate how much power is used during sleep. Apparently, this is one of the areas that should have improved since the first Framework model, let's find out.

My baseline for comparison is the Purism laptop, which, in 10 minutes, went from this:

sep 28 11:19:45 angela systemd-sleep[209379]: /sys/class/power_supply/BAT/charge_now                      =   6045 [mAh]

... to this:

sep 28 11:29:47 angela systemd-sleep[209725]: /sys/class/power_supply/BAT/charge_now                      =   6037 [mAh]

That's 8mAh per 10 minutes (and 2 seconds), or 48mA, or, with this battery, about 127 hours or roughly 5 days of standby. Not bad!

In comparison, here is my really old x220, before:

sep 29 22:13:54 emma systemd-sleep[176315]: /sys/class/power_supply/BAT0/energy_now                     =   5070 [mWh]

... after:

sep 29 22:23:54 emma systemd-sleep[176486]: /sys/class/power_supply/BAT0/energy_now                     =   4980 [mWh]

... which is 90 mwH in 10 minutes, or a whopping 540mA, which was possibly okay when this battery was new (62000 mAh, so about 100 hours, or about 5 days), but this battery is almost dead and has only 5210 mAh when full, so only 10 hours standby.

And here is the Framework performing a similar test, before:

sep 29 22:27:04 angela systemd-sleep[4515]: /sys/class/power_supply/BAT1/charge_full                    =   3518 [mAh]
sep 29 22:27:04 angela systemd-sleep[4515]: /sys/class/power_supply/BAT1/charge_now                     =   2861 [mAh]

... after:

sep 29 22:37:08 angela systemd-sleep[4743]: /sys/class/power_supply/BAT1/charge_now                     =   2812 [mAh]

... which is 49mAh in a little over 10 minutes (and 4 seconds), or 292mA, much more than the Purism, but half of the X220. At this rate, the battery would last on standby only 12 hours!! That is pretty bad.

Note that this was done with the following expansion cards:

• 2 USB-C
• 1 1TB SSD drive
• 1 USB-A with a hub connected to it, with keyboard and LAN

Preliminary tests without the hub (over one minute) show that it doesn't significantly affect this power consumption (300mA).

This guide also suggests booting with nvme.noacpi=1 but this still gives me about 5mAh/min (or 300mA).

Adding mem_sleep_default=deep to the kernel command line does make a difference. Before:

sep 29 23:03:11 angela systemd-sleep[3699]: /sys/class/power_supply/BAT1/charge_now                     =   2544 [mAh]

... after:

sep 29 23:04:25 angela systemd-sleep[4039]: /sys/class/power_supply/BAT1/charge_now                     =   2542 [mAh]

... which is 2mAh in 74 seconds, which is 97mA, brings us to a more reasonable 36 hours, or a day and a half. It's still above the x220 power usage, and more than an order of magnitude more than the Purism laptop. It's also far from the 0.4% promised by upstream, which would be 14mA for the 3500mAh battery.

It should also be noted that this "deep" sleep mode is a little more disruptive than regular sleep. As you can see by the timing, it took more than 10 seconds for the laptop to resume, which feels a little alarming as your banging the keyboard to bring it back to life.

You can confirm the current sleep mode with:

# cat /sys/power/mem_sleep
s2idle [deep]

In the above, deep is selected. You can change it on the fly with:

printf s2idle > /sys/power/mem_sleep

Here's another test:

sep 30 22:25:50 angela systemd-sleep[32207]: /sys/class/power_supply/BAT1/charge_now                     =   1619 [mAh]
sep 30 22:31:30 angela systemd-sleep[32516]: /sys/class/power_supply/BAT1/charge_now                     =   1613 [mAh]

... better! 6 mAh in about 6 minutes, works out to 63.5mA, so more than two days standby.

A longer test:

oct 01 09:22:56 angela systemd-sleep[62978]: /sys/class/power_supply/BAT1/charge_now                     =   3327 [mAh]
oct 01 12:47:35 angela systemd-sleep[63219]: /sys/class/power_supply/BAT1/charge_now                     =   3147 [mAh]

That's 180mAh in about 3.5h, 52mA! Now at 66h, or almost 3 days.

I wasn't sure why I was seeing such fluctuations in those tests, but as it turns out, expansion card power tests show that they do significantly affect power usage, especially the SSD drive, which can take up to two full watts of power even when idle. I didn't control for expansion cards in the above tests — running them with whatever card I had plugged in without paying attention — so it's likely the cause of the high power usage and fluctuations.

It might be possible to work around this problem by disabling USB devices before suspend. TODO. See also this post.

In the meantime, I have been able to get much better suspend performance by unplugging all modules. Then I get this result:

oct 04 11:15:38 angela systemd-sleep[257571]: /sys/class/power_supply/BAT1/charge_now                     =   3203 [mAh]
oct 04 15:09:32 angela systemd-sleep[257866]: /sys/class/power_supply/BAT1/charge_now                     =   3145 [mAh]

Which is 14.8mA! Almost exactly the number promised by Framework! With a full battery, that means a 10 days suspend time. This is actually pretty good, and far beyond what I was expecting when starting down this journey.

So, once the expansion cards are unplugged, suspend power usage is actually quite reasonable. More detailed standby tests are available in the standby-tests page, with a summary below.

There is also some hope that the Chromebook edition — specifically designed with a specification of 14 days standby time — could bring some firmware improvements back down to the normal line. Some of those issues were reported upstream in April 2022, but there doesn't seem to have been any progress there since.

TODO: one final solution here is suspend-then-hibernate, which Windows uses for this

TODO: consider implementing the S0ix sleep states , see also troubleshooting

TODO: consider https://github.com/intel/pm-graph

Standby expansion cards test results

This table is a summary of the more extensive standby-tests I have performed:

Device	Wattage	Amperage	Days	Note
baseline	0.25W	16mA	9	sleep=deep nvme.noacpi=1
s2idle	0.29W	18.9mA	~7	sleep=s2idle nvme.noacpi=1
normal nvme	0.31W	20mA	~7	sleep=s2idle without nvme.noacpi=1
1 USB-C	0.23W	15mA	~10
2 USB-C	0.23W	14.9mA		same as above
1 USB-A	0.75W	48.7mA	3	+500mW (!!) for the first USB-A card!
2 USB-A	1.11W	72mA	2	+360mW
3 USB-A	1.48W	96mA	<2	+370mW
1TB SSD	0.49W	32mA	<5	+260mW
MicroSD	0.52W	34mA	~4	+290mW
DisplayPort	0.85W	55mA	<3	+620mW (!!)
1 HDMI	0.58W	38mA	~4	+250mW
2 HDMI	0.65W	42mA	<4	+70mW

Conclusions:

• USB-C cards take no extra power on suspend, possibly less than empty slots, more testing required

• USB-A cards take a lot more power on suspend (300-500mW) than on regular idle (~10mW, almost negligible)

• 1TB SSD and MicroSD cards seem to take a reasonable amount of power (260-290mW), compared to their runtime equivalents (1-6W!)

• DisplayPort takes a surprising lot of power (620mW), almost double its average runtime usage (390mW)

• HDMI cards take, surprisingly, less power (250mW) in standby than the DP card (620mW)

• and oddly, a second card adds less power usage (70mW?!) than the first, maybe a circuit is used by both?

A discussion of those results is in this forum post.

Standby expansion cards test results, 3.06 beta BIOS

Framework recently (2022-11-07) announced that they will publish a firmware upgrade to address some of the USB-C issues, including power management. This could positively affect the above result, improving both standby and runtime power usage.

The update came out in December 2022 and I redid my analysis with the following results:

Full results in standby-tests-306. The big takeaway for me is that the update did not improve power usage on the USB-A ports which is a big problem for my use case. There is a notable improvement on the DisplayPort power consumption which brings it more in line with the HDMI connector, but it still doesn't properly turn off on suspend either.

Even worse, the USB-A ports now sometimes fails to resume after suspend, which is pretty annoying. This is a known problem that will hopefully get fixed in the final release. Update: I have since then replaced my YubiKey and the problem doesn't occur anymore. It is actually quite possible the old Yubikey was at fault.

Note that there are now 2nd gen DisplayPort and 2nd gen HDMI that supposedly help with those power management issues. They are untested for now.

Battery wear protection

The BIOS has an option to limit charge to 80% to mitigate battery wear. There's a way to control the embedded controller from runtime with fw-ectool, partly documented here. The command would be:

sudo ectool fwchargelimit 80

I looked at building this myself but failed to run it. I opened a RFP in Debian so that we can ship this in Debian, and also documented my work there.

Note that there is now a counter that tracks charge/discharge cycles. It's visible in tlp-stat -b, which is a nice improvement:

root@angela:/home/anarcat# tlp-stat -b
--- TLP 1.5.0 --------------------------------------------

+++ Battery Care
Plugin: generic
Supported features: none available

+++ Battery Status: BAT1
/sys/class/power_supply/BAT1/manufacturer                   = NVT
/sys/class/power_supply/BAT1/model_name                     = Framewo
/sys/class/power_supply/BAT1/cycle_count                    =      3
/sys/class/power_supply/BAT1/charge_full_design             =   3572 [mAh]
/sys/class/power_supply/BAT1/charge_full                    =   3541 [mAh]
/sys/class/power_supply/BAT1/charge_now                     =   1625 [mAh]
/sys/class/power_supply/BAT1/current_now                    =    178 [mA]
/sys/class/power_supply/BAT1/status                         = Discharging

/sys/class/power_supply/BAT1/charge_control_start_threshold = (not available)
/sys/class/power_supply/BAT1/charge_control_end_threshold   = (not available)

Charge                                                      =   45.9 [%]
Capacity                                                    =   99.1 [%]

One thing that is still missing is the charge threshold data (the (not available) above). There's been some work to make that accessible in August, stay tuned? This would also make it possible implement hysteresis support.

Ethernet expansion card

The Framework ethernet expansion card is a fancy little doodle: "2.5Gbit/s and 10/100/1000Mbit/s Ethernet", the "clear housing lets you peek at the RTL8156 controller that powers it". Which is another way to say "we didn't completely finish prod on this one, so it kind of looks like we 3D-printed this in the shop"....

The card is a little bulky, but I guess that's inevitable considering the RJ-45 form factor when compared to the thin Framework laptop.

I have had a serious issue when trying it at first: the link LEDs just wouldn't come up. I made a full bug report in the forum and with upstream support, but eventually figured it out on my own. It's (of course) a power saving issue: if you reboot the machine, the links come up when the laptop is running the BIOS POST check and even when the Linux kernel boots.

I first thought that the problem is likely related to the powertop service which I run at boot time to tweak some power saving settings.

It seems like this:

echo 'on' > '/sys/bus/usb/devices/4-2/power/control'

... is a good workaround to bring the card back online. You can even return to power saving mode and the card will still work:

echo 'auto' > '/sys/bus/usb/devices/4-2/power/control'

Further research by Matt_Hartley from the Framework Team found this issue in the tlp tracker that shows how the USB_AUTOSUSPEND setting enables the power saving even if the driver doesn't support it, which, in retrospect, just sounds like a bad idea. To quote that issue:

By default, USB power saving is active in the kernel, but not force-enabled for incompatible drivers. That is, devices that support suspension will suspend, drivers that do not, will not.

So the fix is actually to uninstall tlp or disable that setting by adding this to /etc/tlp.conf:

USB_AUTOSUSPEND=0

... but that disables auto-suspend on all USB devices, which may hurt other power usage performance. I have found that a a combination of:

USB_AUTOSUSPEND=1
USB_DENYLIST="0bda:8156"

and this on the kernel commandline:

usbcore.quirks=0bda:8156:k

... actually does work correctly. I now have this in my /etc/default/grub.d/framework-tweaks.cfg file:

# net.ifnames=0: normal interface names ffs (e.g. eth0, wlan0, not wlp166
s0)
# nvme.noacpi=1: reduce SSD disk power usage (not working)
# mem_sleep_default=deep: reduce power usage during sleep (not working)
# usbcore.quirk is a workaround for the ethernet card suspend bug: https:
//guides.frame.work/Guide/Fedora+37+Installation+on+the+Framework+Laptop/
108?lang=en
GRUB_CMDLINE_LINUX="net.ifnames=0 nvme.noacpi=1 mem_sleep_default=deep usbcore.quirks=0bda:8156:k"

# fix the resolution in grub for fonts to not be tiny
GRUB_GFXMODE=1024x768

Other than that, I haven't been able to max out the card because I don't have other 2.5Gbit/s equipment at home, which is strangely satisfying. But running against my Turris Omnia router, I could pretty much max a gigabit fairly easily:

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.09 GBytes   937 Mbits/sec  238             sender
[  5]   0.00-10.00  sec  1.09 GBytes   934 Mbits/sec                  receiver

The card doesn't require any proprietary firmware blobs which is surprising. Other than the power saving issues, it just works.

In my power tests (see powerstat-wayland), the Ethernet card seems to use about 1.6W of power idle, without link, in the above "quirky" configuration where the card is functional but without autosuspend.

Proprietary firmware blobs

The framework does need proprietary firmware to operate. Specifically:

• the WiFi network card shipped with the DIY kit is a AX210 card that requires a 5.19 kernel or later, and the firmware-iwlwifi non-free firmware package
• the Bluetooth adapter also loads the firmware-iwlwifi package (untested)
• the graphics work out of the box without firmware, but certain power management features come only with special proprietary firmware, normally shipped in the firmware-misc-nonfree but currently missing from the package

cd /lib/firmware && rm adlp_guc_70.1.1.bin adlp_guc_69.0.3.bin
update-initramfs -u

W: Possible missing firmware /lib/firmware/i915/adlp_guc_69.0.3.bin for module i915
W: Possible missing firmware /lib/firmware/i915/adlp_guc_70.1.1.bin for module i915

[Unit]
Description=start compositing manager
PartOf=graphical-session.target
ConditionHost=angela

[Service]
Type=exec
ExecStart=compton --show-all-xerrors --backend glx --vsync opengl-swc
Restart=on-failure

[Install]
RequiredBy=graphical-session.target

anarcat@angela:~$ compiz --replace
compiz (core) - Warn: No XI2 extension
compiz (core) - Error: Another composite manager is already running on screen: 0
compiz (core) - Fatal: No manageable screens found on display :0

compiz (core) - Warn: No XI2 extension
compiz (core) - Error: Couldn't load plugin 'ccp'
compiz (core) - Error: Couldn't load plugin 'ccp'

[   19.534429] Intel(R) Wireless WiFi driver for Linux
[   19.534691] iwlwifi 0000:a6:00.0: enabling device (0000 -> 0002)
[   19.541867] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-72.ucode (-2)
[   19.541881] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-72.ucode (-2)
[   19.541882] iwlwifi 0000:a6:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-72.ucode failed with error -2
[   19.541890] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-71.ucode (-2)
[   19.541895] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-71.ucode (-2)
[   19.541896] iwlwifi 0000:a6:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-71.ucode failed with error -2
[   19.541903] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-70.ucode (-2)
[   19.541907] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-70.ucode (-2)
[   19.541908] iwlwifi 0000:a6:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-70.ucode failed with error -2
[   19.541913] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-69.ucode (-2)
[   19.541916] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-69.ucode (-2)
[   19.541917] iwlwifi 0000:a6:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-69.ucode failed with error -2
[   19.541922] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-68.ucode (-2)
[   19.541926] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-68.ucode (-2)
[   19.541927] iwlwifi 0000:a6:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-68.ucode failed with error -2
[   19.541933] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-67.ucode (-2)
[   19.541937] iwlwifi 0000:a6:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0-67.ucode (-2)
[   19.541937] iwlwifi 0000:a6:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-67.ucode failed with error -2
[   19.544244] iwlwifi 0000:a6:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-66.ucode
[   19.544257] iwlwifi 0000:a6:00.0: api flags index 2 larger than supported by driver
[   19.544270] iwlwifi 0000:a6:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.63.2.1
[   19.544523] iwlwifi 0000:a6:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
[   19.544528] iwlwifi 0000:a6:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
[   19.544530] iwlwifi 0000:a6:00.0: loaded firmware version 66.55c64978.0 ty-a0-gf-a0-66.ucode op_mode iwlmvm

Graphics acceleration

After loading the latest upstream firmware and setting up a compositing manager (compton, above), I tested the classic glxgears.

Running in a window gives me odd results, as the gears basically grind to a halt:

Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
137 frames in 5.1 seconds = 26.984 FPS
27 frames in 5.4 seconds =  5.022 FPS

Ouch. 5FPS!

But interestingly, once the window is in full screen, it does hit the monitor refresh rate:

300 frames in 5.0 seconds = 60.000 FPS

I'm not really a gamer and I'm not normally using any of that fancy graphics acceleration stuff (except maybe my browser does?).

I installed intel-gpu-tools for the intel_gpu_top command to confirm the GPU was engaged when doing those simulations. A nice find. Other useful diagnostic tools include glxgears and glxinfo (in mesa-utils) and (vainfo in vainfo).

Following to this post, I also made sure to have those settings in my about:config in Firefox, or, in user.js:

user_pref("media.ffmpeg.vaapi.enabled", true);

Note that the guide suggests many other settings to tweak, but those might actually be overkill, see this comment and its parents. I did try forcing hardware acceleration by setting gfx.webrender.all to true, but everything became choppy and weird.

The guide also mentions installing the intel-media-driver package, but I could not find that in Debian.

The Arch wiki has, as usual, an excellent reference on hardware acceleration in Firefox.

Chromium / Signal desktop bugs

It looks like both Chromium and Signal Desktop misbehave with my compositor setup (compton + i3). The fix is to add a persistent flag to Chromium. In Arch, it's conveniently in ~/.config/chromium-flags.conf but that doesn't actually work in Debian. I had to put the flag in /etc/chromium.d/disable-compositing, like this:

export CHROMIUM_FLAGS="$CHROMIUM_FLAGS --disable-gpu-compositing"

It's possible another one of the hundreds of flags might fix this issue better, but I don't really have time to go through this entire, incomplete, and unofficial list (!?!).

Signal Desktop is a similar problem, and doesn't reuse those flags (because of course it doesn't). Instead I had to rewrite the wrapper script in /usr/local/bin/signal-desktop to use this instead:

exec /usr/bin/flatpak run --branch=stable --arch=x86_64 org.signal.Signal --disable-gpu-compositing "$@"

This was mostly done in this Puppet commit.

I haven't figured out the root of this problem. I did try using picom and xcompmgr; they both suffer from the same issue. Another Debian testing user on Wayland told me they haven't seen this problem, so hopefully this can be fixed by switching to wayland.

Graphics card hangs

I believe I might have this bug which results in a total graphical hang for 15-30 seconds. It's fairly rare so it's not too disruptive, but when it does happen, it's pretty alarming.

The comments on that bug report are encouraging though: it seems this is a bug in either mesa or the Intel graphics driver, which means many people have this problem so it's likely to be fixed. There's actually a merge request on mesa already (2022-12-29).

It could also be that bug because the error message I get is actually:

Jan 20 12:49:10 angela kernel: Asynchronous wait on fence 0000:00:02.0:sway[104431]:cb0ae timed out (hint:intel_atomic_commit_ready [i915]) 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:0:00000000 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_70.1.1.bin version 70.1 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] HuC authenticated 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] GuC submission enabled 
Jan 20 12:49:15 angela kernel: i915 0000:00:02.0: [drm] GuC SLPC enabled

It's a solid 30 seconds graphical hang. Maybe the keyboard and everything else keeps working. The latter bug report is quite long, with many comments, but this one from January 2023 seems to say that Sway 1.8 fixed the problem. There's also an earlier patch to add an extra kernel parameter that supposedly fixes that too. There's all sorts of other workarounds in there, for example this:

echo "options i915 enable_dc=1 enable_guc_loading=1 enable_guc_submission=1 edp_vswing=0 enable_guc=2 enable_fbc=1 enable_psr=1 disable_power_well=0" | sudo tee /etc/modprobe.d/i915.conf

from this comment... So that one is unsolved, as far as the upstream drivers are concerned, but maybe could be fixed through Sway.

Weird USB hangs / graphical glitches

I have had weird connectivity glitches better described in this post, but basically: my USB keyboard and mice (connected over a USB hub) drop keys, lag a lot or hang, and I get visual glitches.

The fix was to tighten the screws around the CPU on the motherboard (!), which is, thankfully, a rather simple repair.

USB docks are hell

Note that the monitors are hooked up to angela through a USB-C / Thunderbolt dock from Cable Matters, with the lovely name of 201053-SIL. It has issues, see this blog post for an in-depth discussion.

Shipping details

I ordered the Framework in August 2022 and received it about a month later, which is sooner than expected because the August batch was late.

People (including me) expected this to have an impact on the September batch, but it seems Framework have been able to fix the delivery problems and keep up with the demand.

As of early 2023, their website announces that laptops ship "within 5 days". I have myself ordered a few expansion cards in November 2022, and they shipped on the same day, arriving 3-4 days later.

The supply pipeline

There are basically 6 steps in the Framework shipping pipeline, each (except the last) accompanied with an email notification:

1. pre-order
2. preparing batch
3. preparing order
4. payment complete
5. shipping
6. (received)

This comes from the crowdsourced spreadsheet, which should be updated when the status changes here.

I was part of the "third batch" of the 12th generation laptop, which was supposed to ship in September. It ended up arriving on my door step on September 27th, about 33 days after ordering.

It seems current orders are not processed in "batches", but in real time, see this blog post for details on shipping.

Shipping trivia

I don't know about the others, but my laptop shipped through no less than four different airplane flights. Here are the hops it took:

• Taoyuan, Taiwan 2022-09-23
• Anchorage, Alaska, USA (?!) 2022-09-24
• Memphis, Tennessee, USA 2022-09-25
• Winnipeg, Manitoba, Canada (!! back the wrong way!) 2022-09-26
• Mirabel, Québec, Canada 2022-09-27
• Montréal, Québec, Canada

I can't quite figure out how to calculate exactly how much mileage that is, but it's huge. The ride through Alaska is surprising enough but the bounce back through Winnipeg is especially weird. I guess the route happens that way because of Fedex shipping hubs.

There was a related oddity when I had my Purism laptop shipped: it left from the west coast and seemed to enter on an endless, two week long road trip across the continental US.

Other resources

Dock questions

• list of compatible USB-C docks but beware of the above compatibility problems on the 12th gen

• see also this comprehensive post on USB/TB/DP/docks which has a section on the Framework specifically

• anelki recommended the OWC docks which primarily target Macs but apparently "make really good ones"

• someone else recommended buying "Thunderbolt" docks instead of "USB-C" as the latter don't necessarily include the former, recommending CalDigit docks

Note: I ended up buying a Cable Matters hub, and that didn't work so well, see this entire blog post about USB-C. I'm considering a Dell monitor instead now.

Mods

• all-in-one build
• desktop mod (from this discussion), also a normal desktop adapter to reuse an existing case (from this thread)
• mainboard case (official!)
• battery case (!), the verge has extra photos of the mainboard and battery cases
• tablet mod (kind of clunky, but works!)
• gaming handheld mod (!!!)
• cyberdeck, video
• Framedeck, video part 1, part 2, GitHub
• Cyberdock, pelican case kit with tool storage, power bar, hub, etc, similar to the recovery kit, but missing a battery, network hub, and keyboard
• keyboard mod (i.e. turn the Framework keyboard, touch pad, fingerprint reader and power buttons into a "normal" USB keyboard and hub)
• triple screen laptop mod (video)
• Thinkpad 701C transplant
• Braille laptop

Expansion port modules

• empty drawer and (probably a joke) cup holder
• dual USB-C (prototype stage), expansion hub (just an idea, references other discussions), actually seriously considered by Framework, limited by existing chipsets for now
• full-size SD card reader
• magnetic charger
• Yubikey 5 case and solokey case
• screwdriver
• Ethernet (official, back-order as of 2022-09-13, now shipping as of 2023)
• votes seem to go towards Ethernet and full-sized SD card reader
• 3D printed expansion card holder
• LTE modem card (design thread)
• ESP32-S3 expansion card (source, video)
• UART adapter, CAN, RS485 adapters, logic analyzer
• USB-A-ugment expansion card, hard to describe, but features an internal USB-A port on top of the external one, two extra USB pinouts that can mount another mini-expansion card inside the expansion card, which in turn can be a MicroSD card reader, a USB-C (USB2 only) port, a USB-UART debugging card, or a QWIIC, concerns about this being a scam pinout, no 3D-printed shell yet
• spring-loaded expansion card (probably also a joke)
• RTL SDR
• joystick
• logitech dongle hider with USB-A output
• lego brick expansion card

Check out this forum category for a cornucopia of those.

Sleeves and cases

I carry the 13" Framework laptop in a tomtoc Defender A13 sleeve. It's a nice soft sleeve with a pocket where I fit all the expansion cards and a power supply. There's a pretty long thread about carrying bags and sleeves where I participated (and, you'll notice, bought another Timbuk sleeve I didn't like so much.

In retrospect, I might consider buying a hard shell next time. The Smatree 13.5 looks pretty cool, but it's not clear if it actually fits. This one comment points at one case that does fit

Upstream resources

• community forum, lots of information, much support, wow!
• knowledge base
• repair guides
• Linux-specific guides
• blog (RSS)
• chat is on Discord, but bridged with Matrix, there's talk of bridging it with IRC as well, for now there's a handful of us in #framework on https://libera.chat/
• GitHub organization, interesting repositories include the Expansion Cards, Input Modules, Expansion Bay, mainboard, EmbeddedController

Reviews

• The Verge: Framework Laptop 13 review: a DIY dream come true: "Framework fixed the biggest complaint I had about its laptop last year. The battery life used to be bad. And reader, now it is good"

• The Verge: The Framework Laptop 16 is trying to bring back snap-on removable batteries: also showcases possible keyboard mods Framework is experimenting with

• The Verge: I nearly bought a Framework Laptop, but logistical realities got in the way: "Framework CEO Nirav Patel explains why you can’t easily pick an entry-level CPU with his longer-lasting battery"

• Linus Tech Tips: I Made a Bad Decision – Framework Investment Update, note that Linus is now an investor in Framework and his opinions should therefore be taken with a grain of salt (well, more than usually)

• rtings: great for business use

• Excellent 12th gen review from an Arch Linux user

• Debian wiki installation report, has good tips on the firmware hacks necessary, in part by yours truly

• Hack-a-day: How Framework Laptop Broke The Hacker Ceiling

11th gen reviews

• Ars Technica
• Fedora developer
• iFixit teardown
• phoronix
• amazing keyboard and touch pad, according to Linux After Dark
• most exciting laptops I've ever broken (Cory Doctorow)
• more critical review from an OpenBSD developer